中華人民共和國國家標準(中國大陸GB標準)英文版 |
GB標準是中華人民共和國國家標準,也叫GB國標,是中國大陸強制執行的國家標準,所有中國大陸境內銷售的商品及提供服務都必須符合GB國家標準的要求,包括進口商品及服務; 本網站提供GB國家標準的查詢檢索,英文版翻譯,GB標準產品檢測檢驗及合規性分析服務; |
GB/T 2523-2022 冷轧金属薄板和薄带表面粗糙度、峰值数和波纹度测量方法(中英文版) Method for measuring surface roughness, peak number and waviness of cold-rolled metal sheet and strip |
|||
GB/T 39741.2-2021 滑动轴承 公差 第2部分:轴和止推轴肩的几何公差及表面粗糙度(中英文版) Plain bearings—Tolerances—Part 2:Tolerances on geometrical characteristics and surface roughness for shafts and thrust collars |
|||
GB/T 6060.1-2018 表面粗糙度比较样块 第1部分:铸造表面(中英文版) Surface roughness comparison specimen—Part 1: Casting surface |
|||
GB/T 32189-2015 氮化镓单晶衬底表面粗糙度的原子力显微镜检验法(中英文版) Test method for surface roughness of GaN single crystal substrate by atomic force microscope |
|||
SJ/T 11503-2015 碳化硅单晶抛光片表面粗糙度的测试方法(中英文版) Test methods for measuring surface roughness of polished monocrystalline silicon carbide wafers |
|||
GB/T 31227-2014 原子力显微镜测量溅射薄膜表面粗糙度的方法(中英文版) Test method for the surface roughness by atomic force microscope for sputtered thin films |
|||
GB/T 31226-2014 扫描隧道显微术测定气体配送系统部件表面粗糙度的方法(中英文版) Standard test method for determination of surface roughness by scanning tunneling microscopy for gas distribution system components |
|||
GB/T 30860-2014 太阳能电池用硅片表面粗糙度及切割线痕测试方法(中英文版) Test methods for surface roughness and saw mark of silicon wafers for solar cells |
|||
GB/T 13288.4-2013 涂覆涂料前钢材表面处理 喷射清理后的钢材表面粗糙度特性 第4部分:ISO表面粗糙度比较样块的校准和表面粗糙度的测定方法 触针法(中英文版) Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned substrates - Part 4: Method for the calibration of ISO surface profile comparator and for the determination of surface p |
|||
GB/T 29505-2013 硅片平坦表面的表面粗糙度测量方法(中英文版) Test method for measuring surface roughness on planar surfaces of silicon wafer |
|||
GB/T 13288.2-2011 涂覆涂料前钢材表面处理 喷射清理后的钢材表面粗糙度特性 第2部分:磨料喷射清理后钢材表面粗糙度等级的测定方法 比较样块法(中英文版) Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned substrates - Part 2: Method for the grading of surface profile of abrasive blast-cleaned steel - Comparator procedure |
|||
GB/T 14495-2009 产品几何技术规范(GPS) 表面结构 轮廓法 木制件表面粗糙度比较样块(中英文版) Geometrical product specifications(GPS) - Surface texture: Profile method - Roughness comparison specimens for wooden pieces |
|||
GB/T 13288.3-2009 涂覆涂料前钢材表面处理 喷射清理后的钢材表面粗糙度特性 第3部分:ISO表面粗糙度比较样块的校准和表面粗糙度的测定方法 显微镜调焦法(中英文版) Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 3: Method for the calibration of ISO surface profile comparators and for the determination of su |
|||
GB/T 2523-2008 冷轧金属薄板(带)表面粗糙度和峰值数的测量方法(中英文版) Measuring method of surface roughness and peak count for cold-rolled metal sheet (strip) |
|||
GB/T 13288.1-2008 涂覆涂料前钢材表面处理 喷射清理后的钢材表面粗糙度特性 第1部分: 用于评定喷射清理后钢材表面粗糙度的ISO表面粗糙度比较样块的技术要求和定义(中英文版) Preparation of steel substrates before application of paints and related products-Surface roughness characteristics of blast-cleaned substrates - Part 1: Specifications and definitions for ISO surface profile comparators for the assessment of abrasive bl |
|||
GB/T 6060.3-2008 表面粗糙度比较样块 第3部分:电火花、抛(喷)丸、喷砂、研磨、锉、抛光加工表面(中英文版) Surface roughness comparison specimen - Part 3:Spark-eroded,shot-blasted,grit-blasted,lapped,filed and polished surface |
|||
JJG(JT)024-2002 (中英文版) (Eight continuous surface roughness meter verification procedures) |
|||
GB/T 6060.1-1997 表面粗糙度比较样块 铸造表面(中英文版) Roughness comparison specimens--Cast surfaces |
找到:18條目 | [首頁]-[上一頁]-[下一頁]-[尾頁] | 去到: 1 |